Products

HSS Energy 48V 30Ah AMR Battery helps replacement and OEM buyers match compact mobile robots with a 51.2V 30Ah LiFePO4 pack. Its 16S1P architecture, 1.536kWh energy, CAN + RS485 communication and 285 × 230 × 185 mm reference enclosure support fit, protocol, connector and charger compatibility review. The 30Ah platform is aimed at compact AMRs where battery volume, mounting and service access are limited, but the robot still needs a defined LiFePO4 architecture and smart communication path. For replacement and OEM buyers, the main advantage is that the electrical platform, enclosure reference and CAN/RS485 interfaces are documented together, creating a clearer starting point for fit, charger and protocol review before a sample is released.

HSS Energy 25.6V 100Ah AGV Battery helps OEM and replacement buyers source a higher-energy 8S LiFePO4 platform for automated guided vehicles. Its 2.56kWh capacity supports longer charging intervals, while battery-bay fit, current profile, dock charging and CAN/RS485 are confirmed before sampling. The 100Ah version is intended for projects where the vehicle needs a larger onboard energy reserve and longer intervals between charging opportunities. Its 2.56kWh nominal energy gives fleet planners more room to cover longer routes or higher duty cycles, but the benefit only matters when the battery bay and allowable mass can support the larger pack. HSS therefore combines energy sizing with enclosure, charging and communication review before a sample is approved.

HSS Energy 25.6V 60Ah AGV Battery helps OEM and replacement buyers source a compact 8S LiFePO4 platform for automated guided vehicles. Its 1.536kWh energy, 29.2V charge reference and project-selectable CAN/RS485 support battery-bay, charger, protocol and dock-charging review before sampling. The 60Ah version is positioned for AGVs where compact packaging and planned charging are more important than carrying the maximum possible onboard energy. For fleet and system-integration buyers, the main value is a defined 8S LiFePO4 electrical route combined with project-selectable communication and charging options. That gives the buyer a clearer path to evaluate runtime, battery-bay fit, dock strategy and protocol requirements before investing in a prototype or stocking replacement batteries.

HSS Energy 25.2V 25.6Ah Delivery Robot Battery helps replacement buyers restore commercial delivery and service robots around a 7S8P Li-ion platform. The review focuses on the original battery, 29.4V charger, enclosure, connector, NTC/ID signals and robot validation before a drop-in replacement is approved. For commercial fleets, the purchasing decision is not only about restoring nominal voltage and capacity; it is about reducing replacement risk when the original battery is aging, discontinued or difficult to source. By treating the original pack as the engineering reference, HSS Energy can review the complete replacement path before a quotation is finalized, helping distributors, service centers and fleet operators avoid a battery that fits electrically but fails mechanically or is not recognized by the robot.

HSS Energy 3.7V 1500mAh LiPo Battery helps OEM buyers source a 5.55Wh 1S pouch platform for beauty devices, GPS trackers, portable medical and handheld electronics. Its higher energy suits longer-use compact products, while PCM, connector, current and final pack envelope are confirmed before sampling. The 1500mAh format gives compact products a larger energy reserve than smaller wearable-class cells while staying within a simple 1S charging architecture. For OEM and foreign-trade buyers, the important question is whether the extra runtime justifies the larger pouch footprint and whether the finished pack, including PCM and connector, fits the device. HSS therefore reviews energy, load and mechanical envelope together before the sample is approved.

HSS Energy 3.7V 500mAh LiPo Battery helps OEM buyers source a compact 1S pouch-cell platform for wearables, GPS trackers, beauty devices and smart electronics. Its 1.85Wh format supports PCM and connector integration, while current, wire, polarity and final pack envelope are confirmed before sampling. The 602535 format is most useful where the device has a tight battery cavity and the designer needs a rechargeable source without moving to a larger pouch cell. For foreign-trade and OEM buyers, the value is not just the 500mAh label: PCM layout, connector, lead routing and real load behavior all influence whether the finished pack will fit and operate correctly. HSS therefore reviews the device-side requirements before a sample is released.