When a portable device needs more working voltage and power than a 1S or 2S battery can comfortably provide, an 11.1V 3S lithium battery pack becomes a practical next step.
HSS Energy supplies 11.1V NCM lithium battery packs for portable instruments, robotics, monitoring equipment, powered handheld devices and other OEM products built around a 3S architecture. Common capacities range from 2000mAh to 10000mAh, with typical continuous discharge around 3C depending on the selected cells and pack configuration. Our 11.1V Lithium Battery Packs series includes products such as 11.1V 6000mAh Battery Pack, 11.1V 3000mAh Battery Pack, and so on.
|
Send Your Device Requirements for a Battery Pack Review Voltage • Capacity • Normal / Peak Current • Battery Space • Connector • Quantity |
For 11.1V projects, capacity and current are separate decisions. Series connection sets the 3S voltage platform, while the parallel arrangement influences capacity, runtime, pack size and available current.
|
Configuration Direction |
What It Changes |
|
3S1P |
Compact layout where space and weight are the main constraints. |
|
3S2P / 3S3P |
More capacity and runtime where the device has room for additional cells. |
|
Cell choice |
Changes pack size, available capacity and current capability even at the same 11.1V platform. |
|
Do not size the pack from Ah alone A higher-capacity 11.1V pack may improve runtime, but the motor, pump, actuator or other load can still require more current than the selected cells or protection circuit should provide. |
|
This category mainly uses NCM lithium-ion chemistry. 18650 and 21700 cells are selected according to required runtime, current demand, available volume and final pack dimensions.
|
Cell Route |
Typical Design Consideration |
|
18650 |
Useful for compact, widely standardized cylindrical-cell pack layouts. |
|
21700 |
Useful when higher capacity or a different cell arrangement fits the device better. |
Connector and pack options
Common connector options for this category include:
· JST2.0
· XT30
· DC5521
· XT60
Connector type, cable gauge, cable length, polarity and exit direction should be matched to the device. Protection circuit, insulation, wrapping and pack shape can also be reviewed for OEM projects.
Representative models include:
· 11.1V 2000mAh Battery Pack
· 11.1V 2600mAh Battery Pack
· 11.1V 5000mAh Battery Pack
· 11.1V 10Ah Battery Pack
These are selected examples. Other capacities and 3S series-parallel layouts can be developed around runtime, current, device space and connector requirements.
1. voltage and capacity
2. normal / peak current
3. required runtime
4. battery-space dimensions
5. 18650 / 21700 preference, if known
6. connector type / photo
7. cable length / polarity
8. charging method
9. order quantity
|
Fastest way to start Send the existing battery photo, device drawing or battery-compartment dimensions together with the electrical requirements. |
Why is this battery rated at 11.1V?
It normally uses a 3S NCM architecture with three cell groups connected in series.
What capacity and discharge range is common?
Typical projects are 2000mAh-10000mAh, with around 3C continuous discharge as a common starting point. Final ratings depend on cell and pack design.
Can I choose between 18650 and 21700 cells?
Yes. Cell format is selected around pack dimensions, capacity and current requirements.
Which connectors are commonly used?
JST2.0, XT30, DC5521 and XT60 are common options; other connectors can be reviewed.
Can the pack be customized?
Yes. Capacity, 3S series-parallel layout, protection, connector, cable and pack structure can be developed around the device.