Factory Direct Drone Batteries with Long Cycle Life and Stable Performance

The China 6S 30000mAh UAV Battery is the higher-current 6S step in the HSS capacity matrix, combining 666Wh nominal energy, approximately 2050g finished mass and 90A continuous discharge in a 68 x 78 x 195mm envelope. It is intended for OEM projects where sustained current and installed energy must rise together without moving directly to the larger 40Ah high-energy platform.
666Wh:Nominal Energy
Approx. 2050g:Pack Weight
90A
Continuous Discharge
68mm
Pack Width

6S 22000mAh UAV Battery occupies the mid-capacity position in the HSS 6S product matrix. It combines 488.4Wh nominal energy, approximately 1620g pack mass and 66A continuous discharge in a 55 x 78 x 195mm envelope, giving OEM buyers a defined step between the compact 16Ah platform and larger 30Ah / 40Ah classes.
488.4Wh:Nominal Energy
Approx. 1620g:Pack Weight
66A:Continuous Discharge
About 301Wh/kg:Calculated Pack Ref.

6S 16000mAh UAV Battery by HSS Energy is a 355.2Wh, approximately 1.48kg 6S1P battery platform for custom commercial UAV projects where electrical load, battery mass, available installation space, and interface requirements must be reviewed together. The verified pack rating is 48A continuous discharge, with up to 160A maximum discharge subject to the approved peak-duration boundary.
355.2Wh:Nominal Energy
Approx. 1480g:Complete Pack Weight
48A:Continuous Discharge
270Wh/kg:Cell Energy Density

6S 9000mAh FPV Battery supplied by HSS Energy is a 6S1P high energy lithium polymer pack with 213.3Wh nominal energy, an approximately 824g finished pack weight, and a 165 x 71 x 33 mm envelope. It is positioned for large-format and custom RC/FPV aircraft where installed energy, battery mass, mechanical fit, and electrical compatibility must be balanced carefully. The 300Wh/kg figure is a cell-level value; the calculated complete pack reference is about 259Wh/kg. The product label shows 10C for initial screening, while approved continuous and peak current limits should be confirmed before sampling.

HSS Energy factory's high quality 6S 3200mAh FPV Battery is a 6S1P lithium polymer pack with 71.04Wh nominal energy, approximately 456g finished-pack weight, and a 135 x 45 x 38 mm envelope. Its 3200mAh capacity places it near the LiPo capacity class used by many current 7-7.5 inch long-range FPV platforms, while the product label shows 70C for initial electrical screening. Selection should still be based on aircraft voltage, battery-mass allowance, center of gravity, battery-bay fit, connector layout, and approved finished-pack current limits.