Factory Direct Drone Batteries with Long Cycle Life and Stable Performance

6S 16000mAh UAV Battery by HSS Energy is a 355.2Wh, approximately 1.48kg 6S1P battery platform for custom commercial UAV projects where electrical load, battery mass, available installation space, and interface requirements must be reviewed together. The verified pack rating is 48A continuous discharge, with up to 160A maximum discharge subject to the approved peak-duration boundary.
355.2Wh:Nominal Energy
Approx. 1480g:Complete Pack Weight
48A:Continuous Discharge
270Wh/kg:Cell Energy Density

6S 9000mAh FPV Battery supplied by HSS Energy is a 6S1P high energy lithium polymer pack with 213.3Wh nominal energy, an approximately 824g finished pack weight, and a 165 x 71 x 33 mm envelope. It is positioned for large-format and custom RC/FPV aircraft where installed energy, battery mass, mechanical fit, and electrical compatibility must be balanced carefully. The 300Wh/kg figure is a cell-level value; the calculated complete pack reference is about 259Wh/kg. The product label shows 10C for initial screening, while approved continuous and peak current limits should be confirmed before sampling.

HSS Energy factory's high quality 6S 3200mAh FPV Battery is a 6S1P lithium polymer pack with 71.04Wh nominal energy, approximately 456g finished-pack weight, and a 135 x 45 x 38 mm envelope. Its 3200mAh capacity places it near the LiPo capacity class used by many current 7-7.5 inch long-range FPV platforms, while the product label shows 70C for initial electrical screening. Selection should still be based on aircraft voltage, battery-mass allowance, center of gravity, battery-bay fit, connector layout, and approved finished-pack current limits.